A single storey building consisting of a two-bay truck workshop, with truck hoist and an adjoining office / staff amenity block located at 16 Kaimiro street, Pukete Hamilton. The side area it’s 6700 and 6000 and 71 square metres of land which consists of the following concrete yard area 4508 square metres, workshop 521 square, metres wash by 111 square metres, and offices 310 square metres. The buildings are a combination of structural steel with precast concrete panels and clad in metal cladding. Metal roofing and cladding consists of the following workshop 0.40g coloursteel diamond reverse run BB900 horizontal wall cladding fixed to 20mm battens. The concrete slab on grade was atop its concrete foundations over a 1m deep cut and filled subgrade. This subgrade was over a geomat and grid following geo-technical investigation. The office block was timber framed and had timber LVL rafters then clad in metal profile cladding and roofing. Internally the flooring was either tiled or vinyl and walls painted. A kitchen and operable wall were also installed